User's Manual

ES520 Hardware Guide: Specifications
27
4.2 RJ-45-to-DB9 Console Port Adapter
An RJ-45-to-DB9 adapter (included with each Mesh Point) is
required in order to connect the Mesh Point’s
Console port to a
DB9 terminal connection.
Figure 4.1 shows the pin numbers for the two connectors. With
the RJ-45 connector facing you and oriented with the tab
receptacle up, pins are numbered from right to left, as shown.
With the DB9 connector facing you and oriented with the wide
side up, pins are numbered from right to left, top to bottom.
Figure 4.1 RJ-45 and DB9 Pin Numbering
Table 4.1 shows the adapter pin-outs.
4.3 4-Pin DC Input Connector and Cabling
NOTE: Hardware
Version Powering
Options are covered in
full in Section 1.1.
The connector-cable assembly to power the Mesh Point
version 2 chassis through its weather tight, multi-range, 4-pin
DC input is not included with the Mesh Point.
Mating connectors include the Mini-Con-X® series (part # 382-
4SG-3DC), manufactured by Switchcraft®. Figure 4.2 shows
the pin numbers for mating connectors for the Mesh Point’s 4-
pin power input.
Table 4.1. RJ-45-to-DBP Adapter Pin-Outs
RJ-45 pin DB9 pin standard color
1 8 grey
26brown
32yellow
4 5 green
5-red
6 3 black
7 4 orange
87blue