User's Manual

ES520 Hardware Guide: LEDs and Recessed Button Operation
19
Chapter 3
LEDs and Recessed Button
Operation
3.1 Front-Panel Indicators
NOTE: There are
no LED indica-
tions in a Mesh Point in
blackout mode (refer to
Section 3.2.1.2).
The Fortress ES520 Mesh Point’s front panel features five
system LEDs (
Stat1, Stat2, Clr, Fail and Pwr), four radio LEDs
(two for each of
Radio1 and Radio2), as well as a pair of link/
activity (
Lnk/Act) and power-over-Ethernet (POE) LEDs for each
of the Mesh Point’s nine Ethernet ports.
3.1.1 Status, Cleartext and Failure LEDs
color behavior
Stat1 Stat2 Clr Fail Pwr
system status cleartext failure
system power/
WAN PoE
green
solid
normal
operation
n/a n/a n/a
powered on
slow flash booting -
fast flash --
off - powered off