User's Manual

ES440 Hardware Guide: Specifications
10
4.1.3 Compliance and Standards
The Fortress ES440 is certified by the Wi-Fi Alliance® for the
following standards:
4.2 RJ45-to-DB9 Serial Port Adapter
An RJ45-to-DB9 adapter (included with each Mesh Point) is
required in order to connect the Mesh Point’s serial port to a
DB9 terminal connection.
Figure 4.1 shows the pin numbers for the two connectors. With
the RJ45 connector facing you and oriented with the tab
receptacle up, pins are numbered from right to left, as shown.
With the DB9 connector facing you and oriented with the wide
side up, pins are numbered from right to left, top to bottom.
Figure 4.1. RJ45 and DB9 Pin Numbering
emissions:
CE, FCC, ETSI, MIL STD 464A, MIL STD 461F
immunity:
MIL STD 461F
vibration:
MIL STD 810G
IEEE:
802.11a/b/g
security:
WPA™, WPA2™—Personal and Enterprise
EAP types:
EAP-TLS, EAP-TTLS/MSCHAPv2,
PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,
EAP-SIM, EAP-AKA, EAP-FAST