User Guide

ES210 Hardware Guide: LEDs and Pushbutton Operation
14
NOTE: The battery
will not charge
when the temperature is
outside the acceptable
charging range: 32º–
113ºF (0º–45ºC) when
the Bridge is powered
off; 23º–104º F (-5º–40ºC)
when powered on.
when powered by AC, Battery can exhibit:
 solid green - Battery is fully charged.
 off - Battery is charging.
when powered by battery, Battery can exhibit:
 slow-flash green - Low Battery condition (below 6.3 V): the
Bridge will automatically power down five minutes after
Low
Battery
is first signaled (if external power is not supplied
first).
 off - Bridge is powered off.
Radio can exhibit:
 solid green - Radio is on.
 intermittent green - Bridge’s radio is passing traffic.
 off - Radio is off or Bridge’s RF Kill function is enabled.
Crypto can exhibit:
 The Crypto LED is reserved for a future function on the
Bridge.
3.1.2 Port LEDs
The ES210 Bridge’s top-panel Ethernet ports are equipped
with link (
lnk) and activity (Act) LEDs.
Lnk can exhibit:
 solid green - A link has been established for the port.
 off - The port is not connected.
Act can exhibit:
 intermittent green - Traffic is passing on the link.
 off - Traffic is not passing on the link.
Power
Battery
Radio Crypto
color behavior
AC powered w/out AC power
green
solid
normal
operation
fully charged radio on
n/a
slow flash booting - low battery -
fast flash
battery removed
during operation
-- -
intermittent - - - passing traffic
off unit off charging unit off
radio off or
RF kill activated