- Fortress Wireless Access Bridge User Guide

Fortress Wireless Access Bridge: Installation

NOTE: If you are

deploying multi-

ple Fortress Bridges in a

point-to-point/ multi-

point network they

must be correctly con-

figured for their net-

work roles, typically

with one serving as the

root node and the rest

configured as non-root

nodes (refer to Section

2.2 for more detail).

8 If the Fortress Bridge is the root node in the point-to-point/

multipoint deployment, skip this step.

If the Fortress Bridge is the non-root node in the point-to-

point/multipoint deployment, choose

RADIO SETTINGS from

the main menu and in Bridge Mode setting for Radio 2,

choose

Non-Root, and click Apply.

9 From the main menu on the left choose SYSTEM OPTIONS, and

on the

SYSTEM OPTIONS screen, in the SET SYSTEM TIME

section, enter the correct date and time in the fields

provided, using two-digit values (

hh:mm MM:DD:YY), and click

Apply.

NOTE: The SYSTEM

OPTIONS

screen

features an information-

al timestamp under

SET

SYSTEM

TIME. The re-

fresh function of your

browser updates this

timestamp.

10 On the same screen, under REBOOT SYSTEM, click OK.

11 Click OK again to clear the system dialog.

12 Close your browser.

detail: