Installation Guide

4/4
Install Glass into Bottom Rail of Pure View Full Glass Panel
• Carefully slip full glass sheet vertically into the center of the bottom rail.
• Insert spacers on either side of the glass in the bottom rail as shown. Spacer will be flush with the side of the glass.
Evolve
External
Cup
Evolve
External
Cup
Evolve
External
Cup
Evolve
External
Cup
PV FGP I-Support
Glass
Spacer
Glass
Install Top Rail onto Pure View Full Glass Panel and Install Bracket Caps
• Carefully slip top rail over the top of the glass into the upper Evolve External Bracket Cups.
• Pre-Drill holes and secure rail to Evolve External Bracket Cups at this time with provided T-25 Drive Thread-Cutting
Screws. Use low speed setting on drill.
• Install Evolve External Bracket Caps by sliding cap over the top of the Evolve External Bracket Cup. Cap will snap into
place.
13
• Install (optional) Al Post Caps at this time by pressing onto top of post.
Top Rail
Set Screw
Evolve
External
Cap
Evolve
External
Cap