User Manual
Table Of Contents
- Introduction
- Required Tools + Materials
- Material List
- Physical Features
- Download the App
- Specifications
- Resetting the Guardian Hub
- Installing the Guardian
- Wiring the hub
- Powering the Guardian
- eFlex Specific Instructions
- eVault Specific Instructions
- Commissioning
- Firmware
- Troubleshooting Please fill out a support requests at https://support.fortresspower.com
- Alerts
eFlex Specific Instructions
The Guardian connects to the last remaining communication port on the communication circuit. It does
not matter which communication port is used. Remove the canbus resistor an install the Guardian
communication cable directly onto this port.
For outdoor installations, you may need to install a female-female ethernet connector to transition to
the weatherproof communication cabling, in order to maintain the weatherproof rating of the eFlex
battery. This custom cabling is not required for indoor eFlex installations or installations inside the
DuraRack or FlexTower.