Victron Integration Guide

Rev 2.1 09-14-21

Fortress Power - Victron Inverter Guide

eVault MAX:

Modified Battery-to-Inverter Communication cable

eVault Inverter CAN port pins 1+2 correspond to Victron

pins 7+8.

cut a standard ethernet cable,

cut out wires 3+4+5+6+7+8

cross wires connecting 1+2 on the eFlex to 7+8 in the

Victron VE.Can port.

Note: nothing is connected to eVault Inverter RS485 port

The eVault MAX has dedicated a dedicated port for

inverter communication.

Connect the modified communication cable from the

eVault Max Inverter CAN port to VE.CAN

If more than one eVault is being used the modified Inverter cable connects to eVault Battery number 1

eVault MAX COMMUNICATION PROTCOL

eVault MAX VE.CAN Bus protocol is used with the unique setting of 4

Protool ID is set to 4 for Victron GX using the front panel

touchscreen.