eVault Max 18.5 Manual

V4.2 11-02-21

4.3 PRE-INSTALLTION CHECKLIST

• Check the battery package, type, quantity, appearance and other components for damage and completeness

• Check the battery terminals and connections to make sure they are clean, free of dirt, fluids or corrosion

• All battery cables and their connections should be tight, intact, and NOT broken or frayed

• Check torque on terminal bolts

• Replace any damaged batteries and cables

IMPORTANT NOTE: Please inform us of any problems with the battery within 7 days of receipt of

goods. Otherwise, we will deem the product delivered in good condition.

4.4 INSTALLATION LOCATION

The battery pack must be installed indoors. In addition, make sure that the installation location meets the following

conditions:

• The area is completely waterproof.

• The floor is flat and level (Inclination < 15°).

• There are no flammable or explosive materials nearby.

• The optimal ambient temperature is within the range from 59° to 95°.

• The temperature and humidity are maintained at a constant level.

• There is minimal dust and dirt in the area.

IMPORTANT NOTE: If the ambient temperature is outside the operating range, the battery pack may stop operating

to protect itself. Frequent exposure to harsh temperatures may deteriorate the performance and life of the battery

pack.

4.5 MECHANICAL INSTALLATION STEPS

4.5.1 Mounting and securing the battery

The Fortress eVault Max 18.5 is designed to stand on the floor with the four adjustable support legs on the bottom.

The wheels are provided for serviceability only, not intended for stationary installation. We recommend using the

wall bracket in high seismic areas. Please refer to the eVault Max Data Sheet for weight and dimensions.

4.5.2 Mounting the battery pack to a wall

1. Fasten the screws through the mounting brackets into the holes of the battery pack on its both sides.

2. Secure the mounting brackets to the wall with screws. Make sure to leave a space of at last 2in in between

the battery pack and the wall.

Dimensions are in mm

Back View

Side View

Front View