eVault Max 18.5kWh Lithium Ferro Phosphate (LFP) Installation
4.1 ENVIRONMENT REQUIREMENT
4.2 TOOLS & MATERIALS
The following insulated tools and materials are required:
• Positive and negative battery cables. We recommend copper cables AWG 4/0. The battery cables are not
included. Please refer to the published Battery Cable Sizing Chart for the proper size, based on your system
specication.
• Positive and Negative Terminal luge recommendation: M10 x 1.5 (diameter: 10mm or 3/8in)
• Conduit size recommendation: 1.5 & 2.5 inch
• Screwdriver
• RS 485 cable
• Wall Mount Brackets
• OHSA approved personal protective equipment
Insulated gloves Safety Glasses Safety Shoes
Application scenarios Residence
Operating Environment
Indoor and place away from strong electromagnetic
radiation
Operating Temperature -10~55°C (14~131°F)
IP grade IP54
Storage Temperature
Short time(≤1month): -20~45°C (-4~110°F)
Long time (≥1month): 15~35°C (59~95°F)
Operating Humidity 0 ~ 85%
Max charge/discharge current Vs. Altitude
180A@≤2,000m
162A@2,000m~4,000m
Case Ground requirement Use at least 6mm² copper wire with the resistor≤1Ω.