Download

Step 5.
A. Slide the Foot Bar (11) Into the bottom of
the Height Adjustable Beam (8)and align two
of the holes on the Foot bar with the two
holes on the boom. Secure the foot bar in
place using a Hex Head Bolt (18), a lock
Nut(20), and one Washer(21).
B. Attach the Height Adjustable Beam (8) to
the Bed Frame (5) by using knob (24) and
TAB bolt (23).
C. For added safety, lock the TAB bolt (23).
Step 6.
Attach Safety Strap (25) A side to the
Inversion Table by hooking the end of the
Strap (A) to the triangle hook on the back of
the Bed Frame(2) as shown. Now hook the
other end of Strap (B) to the other triangle
hook on the Front U-Frame (1) as shown.
4