Data Sheet

Differentiating Feature Benet
Enterprise Unied Threat Management
Protects your network with the widest range of security and networking technologies seamlessly
integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others.
Application-Layer Quality of Service
Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 trafc shaping and
application use control.
Robust rogue AP control
Industry’s most comprehensive monitoring, detection and suppression of rogue APs for PCI DSS
compliance.
‘Single Pane of Glass’ Management
Console
Unmatched visibility and control of all wired and wireless network trafc that eliminates blindspots in your
security infrastructure and ensures consistent and effective policy enforcement and compliance.
One Access Point, Many Uses
Software reconguration allows one radio to be dedicated to wireless air monitoring while the other
provides full AP functionality to client; software license allows simultaneous mesh backhaul and remote AP
functionality.
TX Beam Forming (TxBF) and Maximal
Ratio Combining (MRC)
Leads to wider coverage and optimum performance due to extended Rate over a longer range.
Technical Specications FortiAP-112B
Hardware Specifications
Indoor/Outdoor Deployment Indoor or outdoor IP55 rated
Number of Radios 1
Number of Antennas 1 internal
Peak Antenna Gain 6dBi
Frequency Bands (GHz)* 2.400 - 2.4835
Frequency of Radio 1 2.4GHz IEEE b/g/n
Tx/Rx Streams
(802.11n mode)
1x1 MIMO with 1 spatial stream
65 Mbps association rate
Ethernet Port 2 x 10/100
Serial Console Port No
Power over Ethernet (PoE) 15.4W
WME Multimedia Extensions Yes (4 priority queues for voice, video, data and background trafc)
Simultaneous SSIDs 8 (7 for client access, 1 for monitoring)
EAP Type(s)
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-
GTC EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication
WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive
Portal, MAC blacklist & whitelist
Maximum Tx Power 24 dBm (250mW) *
Mean Time Between Failures
IEEE Specications 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1X
Dimensions
Length x Width x Height 7.3 in (18.5 cm) x 2.6 in (6.6 cm) x 1.3 in (3.3 cm)
Access Point Weight 9.5 oz (270 g)
Package (shipping) Weight 16.8 oz (476 g)
Mounting Options Wall mount and Pole mount options, drywall anchors supplied
Environment
Power Adapter Power adapter and PoE injector included
Humidity 10% to 90% non condensing
Operating Temperature -4 – 140 ˚F (-20 – 60 ˚C)
Storage Temperature -4 – 158 ˚F (-20 – 70 ˚C)`
Target Application Economical Outdoor point to point bridging and guest wireless
Directives Low Voltage Directive • RoHS
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws.