User's Manual

Fortecho FST433 User Manual Page 4 of 5
FT-XXX Usage
The FT-XXX Tag is a sealed Industrial tag that can be used for tagging indoor assets.
The tags are supplied with a either a plastic wallet or an adhesive pad allowing them to be
adhered to flat surfaces.
Typical applications are for the security monitoring of artwork and high value assets.
Technical Specification
The FT-XXX tag range operate in the ISM, license free radio band and can be supplied from
Fortecho as either 433MHZ or 868MHz devices.
These bands are not globally free and there are restrictions on their use in some regions
please contact Fortecho or a representative to ensure compliance in your chosen region.
Contact Details
Fortecho can be contacted on the details below.
Matthew Bignell
Systems Engineer
Solon House
40A Peterborough Road
London SW6 3BN
Tel: [phone]
DDI: [phone]
Mob: [phone]
Web: www.fortecho.com
Fitting Instructions
Requirements
▪ FT-XXX Tag
▪ Wallet or adhesive pad
▪ Dry Cloth
Installation
First ensure that the mounting surface is clean and free from debris, remove any dirt using the
cloth.
Using either the wallet or the adhesive pad, adhere the tag to the asset.
The FT-XXX tag should not be installed at a height above 2m from the floor