Instruction Manual

Normal phenomena
Maintenance
Low voltage,the
compressor can't
start
You should purchase pressurizer of more than 1000W when the area of the appliance
installation,that's better to protect your fridge.
Long time to start
When
the ambient temperature too high, it will take long time to start the appliance.
B
u
tton failure
Please check the control board whether the fridge under lock mode.Wh
en under lock mode,
all buttons can't
work.
Dew drops
When
external air
flows into the cool inner surface of the fridge,dew drops can be formed.
If the humidity of the installed location is high or during the rainy season,de
w drops can
form on the outer side of the fridge.This is a natural phenomenon that occurs during the
hu
mid weather,Wipe the water
drops with a dry cloth.
Noise
When
you operate the fridge for the first time,the fridge will operate at high speed to cool
fa
st and the sound can seem louder.Wh
en the internal temperature falls below a certain
level,the noise will subside.
Wh
en the operation of the compressor
is starting or ending;various parts expanding/
contracting or various control devices operating or temperature change within the fridge,you
will
hear
the sounds,these are normal sounds.
Compressor hot
When
working,t
he temperature of the compressor is more than
to
uch the compressor,it m
ay cuase serious injury.
outer
Co
mpressor long time running
Wh
en the ambient temperature too high or
put too much fresh foods into the fridge,it will
take long time to cool down until the appliance run at the setting temperature.
Mi
ddle beams feel hot
Middle beams feel hot after a period of time of the appliance run,it belongs to the normal
ph
enomenon.
- 21 -
176°F,please do not