Installation Manual

STEP 10 – INSTALLATION OF

KICK PLATE

4.53 inch

Kick Plate

4.33 inch max

3.15 inch min

Control Panel

External Door

1.57 inch min

3.15 in.

3.54 in.

3.94 in.

4.33 in.

Ornamental door

Reference Dimension

Serial

Number

3.15 inch

3.54 inch

3.94 inch

4.33 inch

Base Board

Up and down Back and forth

Min :1.57 inch

Kick plate can move up and down. When you are fixing the

kick plate, if the upper and lower adjustment distance of the

kick plate can not meet the installation requirements, you can

ser a sharp knife to cut one piece along the groove in the kick

plate (three pieces can be cut down, and each piece is 10 mm

high. Note that it requires professionals to operate.

Notice:

The required height of the kick plate is as per the principle

of aesthetic, opening the door smoothly, and closing the

door smoothly. Please check the suggested chart for

the reference.

INSTALLATION