Installation Manual

STEP 9 – CONNECT POWER SUPPLY
Power supply cord - Plug into a grounded 3 prong outlet.
Plug into a grounded 3 prong outlet.
Make sure the socket is compatible with the plug of the appliance,
the socket must have earing wire, and can hold 120V/13A,
otherwise damage or accidence may occur, other electric
appliance with big power cannot use the same socket with the
dishwasher.
Figure O
14
INSTALLATION
INSTALLATION
IMPORTANT:
When connecting drain line to disposer, check to be sure that drain
plug has been removed.
DISHWASHER WILL NOT DRAIN IF PLUG IS LEFT IN PLACE.
TIP: Avoid unnecessary service call charges. Always be sure
disposer drain plug has been removed before attaching dishwasher
drain hose to the disposer.
Remove
Disposer Plug
Plug into a grounded 3 prong outlet. Do not remove ground
prong.
Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions
can result in death, fire, or electrical shock.
Electrical Shock Hazard
WARNING