Installation Manual

STEP 7 – FIXATION OF DISHWASHER

1. Fixing the dishwasher with the cabinet by turning the screws.

2. Plug the four hole plugs into the holes in the sketch map.

Figure K

Dishwasher liner right and left side and the top 4 holes, use

screws ST4*26 dishwasher fixed on the cabinet. (Self-tapping

screws were matching)

Adjust the back feet

Adjust the front feet

+ - + -

ST4*26

hole plug

INSTALLATION

TIP: Pull lower rack out, about halfway. Check to be sure the rack

does not roll forward or back into dishwasher. If the rack rolls in

either direction, the dishwasher must be leveled again.

Adjust the height by turning to make sure the dishwasher is level.

Adjust the height by turning the feet to make sure the dishwasher is level.

Figure J