Installation Manual

STEP 3 – INSERT DRAIN HOSE AND

POWER CORD THROUGH CABINET

STEP 4 – SLIDE DISHWASHER PARTIALLY

INTO CABINET

Figure I

Maximum

Drain Hose

Length 10'

Water

Line

Drain

Hose

Power Cord

Insert drain hose into cabinet wall hole.

Insert the power cord into another cabinet wall hole.

TIP: Position water line and house wiring on the floor to avoid

interference with base of dishwasher.

DO NOT PUSH AGAINST FRONT PANEL WITH KNEES.

DAMAGE WILL OCCUR.

Slide dishwasher into the opening a few inches at a time.

Do Not Push Against Front Door Panel with Knee.

Damage to the door panel will occur.

As you proceed, pull the drain hose through the opening under the

sink. Stop pushing when the dishwasher is a few inches forward of

adjacent cabinetry.

Make sure drain hose is not kinked under the dishwasher and there

is no interference with the water line and wiring or any other

component.

INSTALLATION