Operation Manual

VFX1 HEADGEAR User's Manual
VRMOUSE Driver program used to support the VFX1 Headgear system in
non-native mode. The driver simulates mouse and keystroke
actions for applications that do not directly support the VFX1.
Headset movements, CyberPuck motions, and buttons actions,
are translated into simulated mouse and keyboard input for the
non-native mode application.
VRMOUSE is compatible with the standard system mouse
driver. It is important, however, that if both drivers are
loaded, VRMOUSE is loaded AFTER
loading your mouse
driver.
When you run an application using VRMOUSE support,
VFX1 tracking is activated by holding the CyberPuck
horizontally and depressing the bottom button. After running
your application repeat this action to deactivate VFX1
tracking and re-enable use of your normal mouse (see page 1-
6).
Command Line Options:
appname Load and initialize VRMOUSE to
support the application specified by
appname (initialization values are
obtained from the VRMOUSE.INI file).
Instructions for using the application
with the VFX1 Headgear are also
displayed.
-H HELP. Display a list of supported
applications plus a list of all switch
options.
-F Remove the driver from memory and
FREE up the memory space.
-Q QUIET mode - suppress the start-up
display.
A-2