Operation Manual

VFX1 HEADGEAR User's Manual
provide VFX1 HEADGEAR keyboard and mouse simulation.
Although VRMOUSE will support most non-native mode
applications directly, optimal support is provided for
applications included in the VRMOUSE.INI file. Refer to the
VRMOUSE section in Appendix A for further information.
Symptom 9: When I run an application the message "Keyboard Insertion
Disabled" appears on my screen.
Check: Is your computer system 100% PC Compatible? Keyboard
support, as implemented by a few PC clone manufacturers, is not
fully compliant with the PC standard. When running non-native
mode applications (see symptom 8 above), the VRMOUSE
driver, which simulates keyboard entries, tests your computer
system. If a keyboard incompatibility is found, the error
message above is displayed and limited functionality provided.
Check with your computer's manufacturer. You may need to
replace your system's motherboard to obtain full VFXI
HEADGEAR functionality.
Symptom 10: My CyberPuck does not work with my application.
Check: Did you activate the CyberPuck? The CyberPuck is toggled on
and off by holding the unit horizontally and clicking the bottom
button (see page 1-6). Try performing this action to correct the
problem.
The application may not utilize the CyberPuck. Check your
application's manual.
Symptom 11: My mouse does not work after running an application with
the VFX1 HEADGEAR.
Check: Did you disable VRMOUSE support? While the CyberPuck is
active, your mouse is disabled. Therefore, it is necessary to
disable mouse and keyboard simulation by holding the
CyberPuck horizontally and pressing the bottom button to
reinstate normal mouse operation (see page 1-6). Try
performing this action to correct the problem.
5-6