Operation Manual

VFX1 HEADGEAR User's Manual
To run the SETVFX1 setup program (if not entered directly from the INSTALL
program), at the DOS prompt, enter the following lines:
C: <enter>
CD \VFX1 <enter>
SETVFX1 <enter>
If you changed the default drive and directory name supplied during installation,
enter those values in place of the defaults "C:" and "VFX1".
The VFX1 HEADGEAR setup program main menu will appear. A mouse may be
used to select and move through the various menu options. Alternately, the
following keys may be use:
<esc> Terminate current activity and return to previous menu
<enter> Accept menu selection/ data input <up-arrow> Move
upward through menu selection items <down-arrow> Move
downward through menu selection items
VIP Card Setup
NOTE: The VIP Card setup utility SETUP VIPPORT is entered directly from the
INSTALL program.
The SETUP VIPPORT menu option of the SETVFX1 setup program permits
you to inspect, change, test, and accept the current or a new Base I/O Address
and Interrupt request (IRQ) setting for the VIP Card. You should use the default
values unless the program detects a possible conflict with another adapter in
your computer system.
If you change and accept new setup values for the VIP card, The setup program
will modify, with your confirmation, the computer's AUTOEXEC.BAT file to
include the updated values. Should you change the jumper setting on the VIP card,
it would be necessary to run this utility.
4-2