Operation Manual

The following section provides a step-by-step procedure for installing the VFX1
Interface Protocol (VIP) Card in your system.
CAUTION! The discharge of static electricity can damage sensitive electronic
components both on the VIP card and in your computer. To avoid such damage,
please take the following precautions before you touch your VIP card or the inside
of your computer:
• Work in an area with at least 50% relative humidity.
• Do not wear wool or polyester clothing , and do not allow clothing to
touch any components while working.
• Touch the metal chassis of your computer to reduce any static on you or
wear a grounding wrist strap, available at many electronic stores.
STEP 1. Open Your Computer System
□ CAUTION! Potentially Lethal voltages exist inside your computer. Make
sure the power to your computer and attached peripherals is switched off. For
added safety, unplug your system power cord.
□ Remove the cover screws, typically located at the back of the computer, then
carefully slide the cover off. Consult the documentation that came with your
computer for precise instructions on safely opening the unit.