User Guide
QUICK START GUIDE
Overview
2.1
2.2
2.3
3.1
3.2
Construction of barn
Daily routines Calf Feeder
Accessories
Installation checklist
Automatic Feeder
1
2
3
Feeding plan
Manual calibration
Automatic calibration
Animal control
Cleaning with 1 detergent
Cleaning with 2 detergent
IFS (SynchroFeed)
Additive doser
Connecting CalfAppGO! and CalfCloud
Installation checklist
MilchMobil
4
4.1
Installation checklist
Lamb Feeder
5
5.1
Different versions available for powder or combi feeders
Start-up of a new automatic calf feeder
Adjust quantity, concentration, limitation per visit and fresh milk ration
if available
Calibration of components - water, powder, fresh milk ration if available and detergent
Congure the automatic calibration. Trouble shooting.
Control calves at the handheld of the calf feeder
Cleaning settings and manual cleaning with 1 detergent
Cleaning settings and manual cleaning with 2 detergents
Start-up a new IFS station to feed calves parallel
Start-up a powder additive doser, with calibration and setting the feeding plans
Settings for using the CalfCloud connection on a calf feeder
with trouble shooting
Requirements for calves and calf feeder
Start-up a new MilchMobil
Start-up a new lamb feeder
A QuickStartGuide provides a brief overview of the settings options or recommendations on specic topics. This guide cannot take
into account all possible variants and does not replace the operating manual, which must be read and observed before commissioning!
mobile milk delivery
In the calf barn
1.1
1.2
1.3
1.5
1.4
1.6
1.7
Animal management
Enter new transmitter, register and cancel calves
1.8