User Guide

This checklist refers to the basic equipment of the calf feeder. Not all available functions of the automatic feeder or the extensions can be shown.
For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)
Connect water
1
Connect power
2
Establish ground connection
3
4
Provide draining options
Left sideRight side
1
4
3
2
1 on the left side of the feeder, 1
in front of the feeder in the middle
of the housing and 1 at every
5
TIP: The switch can be found on the main board
of the calf feeder (Open the plate on the back)
10
Open door on the left side and plug it in
This document provides a brief overview of the things that need to be taken into account when commissioning a feeder for the rst time.
For more details, see the corresponding as-
sembly instructions.
9
50-80 cm
10-15 cm
19,7 - 31,5 ´´
50-80cm
4 - 6´´
TIP: check QuickStartGuide 2.3.CalfCloud
Mount and connect raceway, antenna
and suction point
or
8
7
6
Mount protective grid
Connect Ethernet cable
Switch on vapour screen for powder
outlet if available
7
6
9
Install external detergent supply
10
MP
OFF
ON
Fill with the milk powder
8
Turn the automatic feeder on
11
QUICK START GUIDE
Automatic calf feeder - powder
1.1 Installation checklist