User Guide

calibration

hose pumps

start all automatic?

select station

cleaning

circuit cleaning

start?

suction hose

ushing return line

This checklist refers to the basic equipment of the calf feeder. Not all available functions of the automatic feeder or the extensions can be shown.

For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)

Calibrate the IFS

Perform cleaning

Connect suction hose and ushing return line.

Further Information

min.35cm

Only use Förster-Technik teats with open ends. Don‘t use teats with a cross cut, these could damage the

pump.

The pump speed can be adjusted for each individual group.

Have the suction hose replaced by a technician if damaged.

Don‘t ignore calibration warnings. If warnings come back daily, check pump and replace pump hose by a

technician if necessary.

Clean the membrane of the pressure sensor at least every 3 months with warm water.

Replace if damaged or out of shape.

Only use Förster-Technik hoses.

plans

feed

max. speed

QUICK START GUIDE

Automatic calf feeder- 2.1 SynchroFeed (IFS) single and quadruple