User manual

Compartment for prewash phase an
soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Compartment for stain remover.
Flap for powder or liquid detergent.
Always follow the instructions
that you find on the packaging
of the detergent products.
Check the position of the flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the
dispenser.
1
2
3. To use powder detergent, turn the flap
up.
A
4. To use liquid detergent, turn the flap
down.
B
With the flap in the position
DOWN:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
detergent than the limit
shown on in the flap.
• Do not set the prewash
phase.
• Do not set the delay
start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
Setting a programme
1. Turn the programme knob. The related
programme indicator comes on.
The indicator of button Start/Pause -
Départ/Pause flashes with red colour.
The display shows the default
temperature, the spin speed and the
empty indicator bars of the available
functions.
2. To change the temperature and/or the
spin speed, press the related buttons.
3. Set the available functions.
Starting a programme without
the delay start
Press button Start/Pause - Départ/Pause
to start the programme.
18