User manual

shows the number of minutes or hours
of delay.
The related indicator comes on.
2. Press button Start/Pause - Départ/
Pause.
The appliance starts the countdown of the
delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button Start/
Pause - Départ/Pause to start
the appliance, you can cancel or
change the set of the delay
start.
Cancelling the delay start
To cancel the delay start:
1.
Press button Start/Pause - Départ/
Pause to set the appliance to pause.
The related indicator flashes.
2.
Press button Zeitvorwahl - Départ
Différé repeatedly until the display
shows
.
3. Press button Start/Pause - Départ/
Pause again to start the programme
immediately.
Behaviour of the appliance
After approximately 15 minutes
from the start of the
programme:
• The appliance adjusts
automatically the cycle time
to the laundry you have put in
the drum to have perfect
washing results in the
minimum necessary time.
• The display shows the new
time value.
Cancelling a running
programme
1. Press button Auto Off to cancel the
programme and to deactivate the
appliance.
2. Press button Auto Off again to activate
the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
Interrupting a programme and
changing a function
You can change only some options before
they operate.
1.
Press button Start/Pause - Départ/
Pause.
The related indicator flashes.
2.
Change the function set.
3.
Press the button Start/Pause - Départ/
Pause again.
The programme continues.
Opening the door
If the temperature and level of
the water in the drum are too
high and the drum still rotates
you cannot open the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press button Start/Pause - Départ/
Pause.
In the display the related door lock indicator
goes off.
2. Open the appliance door.
3. Close the door and press button Start/
Pause - Départ/Pause.
The programme or the delay start
continues.
End of cycle
When the programme has finished, the
appliance stops automatically. The acoustic
signal operates (if it is active).
In the display comes on and the door
locked indicator
goes off.
19