User manual

BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in the
compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
DAILY USE
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
For a correct operation of the weight sen-
sor, activate the appliance and set the
programme BEFORE you put the laundry
in the drum.
Activating the appliance
Press Auto Off to activate or deactivate the
appliance. A tune sounds when the appli-
ance is activated.
Setting a programme
1. Turn the programme knob and set the
programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause - Dé-
part/Pause flashes.
• The display shows:
– the default temperature
– the spin speed
– the indicators of the programme
phases
– the programme duration.
2.
If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you acti-
vate an option, the indicator of the set
option comes on.
If you set something incorrect, the dis-
play shows the message Err.
Loading the laundry
1. Open the appliance door.
2.
The display (J) shows the maximum
load for the programme (MAX) and the
weight of the laundry (KG).
3.
Put the laundry in the drum, one item at
time. Shake the items before you put
them in the drum.
4. On the display the weight of the laundry
updates by steps of kg 0.5. The weight
is indicative and changes with the type
of the laundry.
If you put in the drum more laundry
than the maximum load, the symbols
MAX and the value 0.0 start to flash.
You can wash your laundry but the wa-
ter and energy consumption increase.
To have the best consumption and
washing performance remove some
items until the symbols stop to flash.
The overload indication is available only
for programmes with a maximum load
lower than the appliance maximum
load.
5. Close the door. The value 0.0 near the
symbol % on the display shows the
quantity of the detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
13