User manual

Starting a programme with
delay start
• Press Zeitvorvahl - Départ Différé again
and again until the display shows the de-
lay you want to set. The related indicator
comes on the display.
• Press Start/Pause - Départ/Pause:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set of
the delay start before you press Start/
Pause - Départ/Pause .
To cancel the delay start:
1. Press Start/Pause - Départ/Pause to
set the appliance to pause.
2.
Press Zeitvorvahl - Départ Différé until
the display shows
’.
Press Start/Pause - Départ/Pause
again to start the programme immedi-
ately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1.
Press Start/Pause - Départ/Pause. The
indicator flashes.
2.
Change the options.
3.
Press Start/Pause - Départ/Pause
again. The programme continues.
Cancelling a programme
1.
Press Auto Off for some seconds to
cancel the programme and to deacti-
vate the appliance.
2. Press the same button again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the wa-
ter.
Opening the door
While a programme or the delay start oper-
ates, the appliance door is locked and the
display shows the indicator
.
Caution! If the temperature and level
of the water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1. Press Start/Pause - Départ/Pause to
pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4. Close the door and press Start/Pause -
Départ/Pause again. The delay start
continues to operate.
Open the appliance door when the
programme operates:
1.
Press Auto Off for some seconds to
deactivate the appliance.
2.
Wait for some minutes and then open
carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
•
In the display a
comes on.
• The indicator Start/Pause - Départ/Pause
goes off.
•
The door lock indicator
goes off.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mildew
and odours.
• Close the water tap.
• Press Auto Off for some seconds to de-
activate the appliance.
The washing programme is completed,
but there is water in the drum:
– The drum turns regularly to prevent the
creases in the laundry.
–
The door lock indicator
is on. The
door stays locked.
– You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin
speed.
2.
Press Start/Pause - Départ/Pause.
The appliance drains the water and
spins.
3.
When the programme is completed
and the door lock indicator
goes
off, you can open the door.
16