User manual

Programmes Load
(Kg)
Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Koch/Bunt -
Blanc / Couleurs
60 °C
8 1.50 66 179 43
Koch/Bunt -
Blanc / Couleurs
40 °C
8 0.90 66 175 43
Pflegeleicht -
Synthétiques 40
°C
4 0.60 48 110 35
Feinwäsche -
Délicats 40 °C
4 0.70 58 91 35
Wolle - Laine 30
°C
2 0.35 57 56 30
Standard cotton programmes
Standard 60 °C
cotton
8 0.83
61
220 43
Standard 60 °C
cotton
4 0.54
39
184 43
Standard 40 °C
cotton
4 0.43
39
179 43
Off Mode (W) Left On Mode (W)
0.05 0.05
The information given in the chart above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.
1) At the end of spin phase.
OPTIONS
Temperature (Temperatur -
Température)
Set this option to change the default tem-
perature.
Indicator
= cold water.
The indicator of the set temperature comes
on.
Spin (U./Min. - T/min.)
With this option you can decrease the de-
fault spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
•
The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with the
water in the drum. The drum turns regu-
larly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
•
The display shows the indicator
.
To drain the water refer to ‘At the end
of the programme’.
11