User manual

BEFORE FIRST USE
1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at
the highest temperature without
laundry.
This removes all possible dirt from the drum
and the tub.
DAILY USE
WARNING! Refer to Safety
chapters.
Using weight sensors
For a correct operation of the
weight sensor, activate the
appliance and set the
programme BEFORE you put
the laundry in the drum.
Before activating the appliance
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
Activating the appliance and
setting a programme
1.
Press button Auto Off to activate the
appliance.
2.
Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The indicator of Start/Pause - Départ/Pause
button flashes with red colour.
The display shows the default temperature
and spin and the empty indicator bars of
the available functions.
3. If it is necessary, press Temperatur -
Température button and U./Min. - T/
min. button to change the water
temperature and the spin speed.
4. If necessary, press the related buttons
to add some functions or to set a
delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.
Loading the laundry
1. Open the appliance door.
The display shows the maximum load for
the programme and the weight of the
laundry .
2. Put the laundry in the drum, one item at
time. Shake the items before you put
them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is
indicative and changes with the type of the
laundry.
If you put in the drum more
laundry than the maximum load,
the symbol
and the value
start to flash.
You can wash your laundry but
the water and energy
consumption increase.
To have the best consumption
and washing performance
remove some items until the
symbols stop to flash.
The overload indication is
available only for programmes
with a maximum load lower than
the appliance maximum load.
3. Close the door.
The value near the symbol on the
display shows the quantity of the detergent
to use.
This data is indicative and refers to the
detergent quantity for a maximum load that
the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or damage
to the laundry.
16