User manual

– All settings are cancelled.
–
Press button
1
to activate the appli-
ance again.
– Set again the washing programme and
all possible options.
• After 5 minutes from the end of the
washing programme. Refer to 'At the end
of programme'.
Programme knob
2
Turn this knob to set a programme. The re-
lated programme indicator comes on.
Display
3
A H
K J
C D E F GB
M L
I
The display shows:
A
The temperature of the set programme
Cold water
B
The spin speed of the set programme
No Spin symbol
1)
Rinse Hold symbol
1) Only available for SPIN/DRAIN programme.
C
Prewash phase
Washing phase
Rinses phase
Spin phase
The phase symbols
• When a programme is set, all the symbols of the phases related to the pro-
gramme come on.
• When the programme starts, only the symbol of the phase in operation flashes.
• When the programme is completed, the symbol of the last phase is on.
D
The steam symbol comes on when you set a Steam programme.
E
The detergent overdosing symbol comes on at the end of the cycle
when the appliance detects too much detergent.
6