User manual

Programmes Load
(Kg)
Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60 °C 8 1.5 66 179 43
Cottons 40 °C 8 0.9 66 175 43
Synthetics 40 °C 4 0.6 48 110 35
Delicates 40 °C 4 0.7 58 91 35
Wool/Hand wash
30 °C
2 0.35 57 60 30
Standard cotton programmes
Standard 60 °C
cotton
8 0.89 60 223 43
Standard 60 °C
cotton
4 0.74 37 190 43
Standard 40 °C
cotton
4 0.49 37 171 43
1) At the end of spin phase.
Off Mode (W) Left On Mode (W)
0.05 0.05
The information given in the charts above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.
BEFORE FIRST USE
1. To activate the drain system, put 2 litre
of water in the main wash compartment
of the detergent dispenser.
2.
Put a small quantity of detergent in the
main wash compartment of the deter-
gent dispenser. Set and start a pro-
gramme for cotton at the highest tem-
perature without laundry. This removes
all possible dirt from the drum and the
tub.
USING THE APPLIANCE
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
For a correct operation of the weight sen-
sor, activate the appliance and set the
programme BEFORE you put the laundry
in the drum.
Activating the appliance and
setting a programme
1.
Press button
1
to activate the appli-
ance.
2.
Turn programme knob
2
to the nec-
essary programme. The programme in-
dicator comes on.
3.
The indicator of button
4
flashes with
red colour.
4. The display shows the default tempera-
ture and spin and the empty indicator
bars of the available functions.
5.
If it is necessary, press button
10
and
button
9
to change the water temper-
ature and the spin speed.
6.
If necessary, press the related buttons
to add some functions or to set a de-
layed start. The display shows the sym-
bol of the set function and the digit (I)
shows the delayed time.
LOADING THE LAUNDRY
1.
Open the appliance door.
13