User manual

4) The wash and spin phase of this programme is soft to prevent the creases of the laundry. The appliance adds
some rinses.
5) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with
the laundry. To select the DRAIN programme only, set the function NO SPIN.
6) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs delicate rinses and a
short spin.
7) Set this programme to decrease the time and the consumption of energy and water. Use a special detergent for
very low temperature.
8) STANDARD PROGRAMMES for the Energy Label consumption values. According to regulation 1061/2010,
these programmes are respectively the «standard 60° C cotton programme» and the «standard 40° C cotton
programme». They are the most efficient programmes in terms of combined energy and water consumption for
washing normally soiled cotton laundry.
Set this programme to have a good washing results and decrease the energy consumption. The time of the
washing programme is extended.
The washing temperature of the washing phase may differ from the temperature declared for the selected pro-
gramme.
STEAM PROGRAMMES
Programme
1)
Type of load Max. load
Auffrischen - Rafraîchir
Steam Refresh
This cycle removes odours from the
laundry.
Steam does not remove animal
odours.
Cotton and synthetic items. up to 1.5 Kg
Glätten - Défroissage
Steam Anticrease
This cycle helps to dewrinkle the laun-
dry.
Cotton and synthetic items. up to 1.5 Kg
Steam can be used for dried, washed or worn once laundry. These programmes can reduce
creases and odours and make your laundry more soft
Do not use any detergent. If necessary, remove stains by washing or using localized stain re-
moval.
Steam programmes do not perform any hygienic cycle.
Do not set the Steam programme for this type of items:
• items where it is not specified on the care label as being suitable for tumble-drying
• all items that have plastic, metal, wooden parts or alike.
1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feels humid. It is better to
expose items to the fresh air for about 10 minutes to let the humidity dry. When the programme is completed,
quickly remove the laundry from the drum. After a steam cycle, items may to be ironed anyway, but with less
effort!
CONSUMPTION VALUES
At programme start the display shows the duration programme for the maximum
load capacity.
During the washing phase the programme duration is automatically calculated and
can greatly be reduced if the laundry load is lower than the maximum load capacity
(e.g. Cotton 60°C, maximum load capacity 8 kg, the programme duration exceeds 2
hours; real load 1 kg, the programme duration don’t reach 1 hour).
When the appliance is calculating the real programme duration a dot blinks in the
display.
The data of this table are approximate. Different causes can change the data: the
quantity and type of laundry, the water and ambient temperature.
12