User manual

Refer to the information supplied with this
appliance for guarantee condition and point
of contact. The information to give to the
service is on the rating plate.
We recommend that you write the information
here:
Model
(MOD.)
..................
Product number
(PNC)
..................
Serial number
(S.N.)
..................
Installation
Unpacking
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
5. Open the door. Remove the polystyr-
ene piece from the door seal and all the
items from the drum.
6. Put one of the polystyrene packaging
elements on the floor behind the appli-
ance. Carefully put down the appliance
with the rear side on it. Make sure not
to damage the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
22