User manual

20
Use
Cancelling the delayed start after the programme has started:
● set the washing machine to PAUSE by pressing the button 7;
● press the button 8 until the symbol 0’ is displayed;
● press the button 7 again to start the programme.
The button
8 cannot be selected with DRAIN programme.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
7.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O and then to the new programme position. Start
the new programme by pressing the button
7 again. The washing water in the
tub will be not emptied out.
Interrupting a programme
Depress the button 7 to interrupt a programme which is running, the
corresponding light starts to flash. Press the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
● if the DOOR symbol disappears, the door can be opened.
● if the DOOR symbol doesn’t go off, it means that the machine is already
heating or that the water level is too high. In this case the door cannot be
opened.
● If you cannot open the door but you need to open it, you have to switch the
machine off by turning the selector dial to O. After some minutes the door
can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme again and to press
the button
7.
132962110.qxd 30/05/2008 11.14 Pagina 20