User manual

37
Making the appliance level
3 Automatic foot: The rear foot on the left-hand
side of your washing machine is built as a
shock absorbing foot, which is why the appli-
ance gives in the back left-hand corner if put
under load. The automatic foot guarantees
that the appliance does not move even at high
spin speeds. Basically the automatic foot does
not need to be set.
The four feet of the appliance are pre-adjusted.
Large degrees of unevenness can be compensated
for by individually adjusting the height adjustable
screw feet.
Use the special spanner supplied to do this.
Important! Do not use pieces of wood, cardboard or
such like to level out unevenness in the floor, but ad-
just the height adjustable screw feet instead.