User manual

Removing the transit pack-

aging

Important! Before using the appliance for the first

time, all parts of the transit packaging must be re-

moved! Keep the transit packaging in a safe place, in

case it is needed at a later date when the appliance

is to be moved (e.g. moving house).

1. At the back of the appliance, open both hose clips

and remove both hoses and mains cable.

2. Remove both hose clips from the appliance by

jerking them hard.

3 Special spanner A and sealing caps B (2 off)

and C (1 off) are supplied with the appliance.

3. Remove screw D with its compression spring using

special spanner A.

4. Turn sealing cap C upside down as shown in the il-

lustration.

5. Seal hole using sealing cap C.