User manual

21
Setting extra options
Independent of any programme you can set different
basic settings. These basic settings will permanently
remain active until they are deselected again.
MEMORY
Saving a programme setting
First set a programme (e.g. LINEN/EASY-CARES,
40°C, 1200 rpm, with the GENTLE WASH option),
then save it.
1. Use the control knob to highlight LINEN/EASY-C.
2. Set the temperature and the spin speed.
3. Press the OPTIONS key.
4. Highlight the GENTLE WASH option.
5. Press the SELECT key.
The S symbol will appear in the display.
6. Press the EXTRAS key.
MEMORY is highlighted:
7. Press the SELECT key.
MEMORY
1, 2, 3, 4
Frequently used programme settings can be stored. The stored programme setting
can then be selected like a normal programme. There are a total of four memory po-
sitions available.
ADD RINSE P Additional rinse cycle, only effective with the programmes COTTONS, LINEN/EASY-
CARES, ENERGY SAVING, DELICATES, 40°/60°COLORED, QUICK IRON and VIS-
COSE.
GENTLE SPIN The washing does not cling to the side of the drum as much and can be taken out
more easily. Only effective with the programmes COTTONS, LINEN/EASY-CARES,
ENERGY SAVING, 40°/60°COLORED, STARCH and SPIN.
LANGUAGE To set the language in which the indicators are to appear in the display.
TIMER To set the current time.
VOLUME You will hear an acoustic signal when you press the keys. The volume of this signal
can be regulated and/or the signal can be deselected. The volume of the signal for
error messages cannot be altered.
LINEN-EASY-C. 40°C
1200 RPM 10:17-12:16
î
START
LINEN/EASY-C.
).
40°
ENERGY SAVING
COTTONS
1200
DELICATES
OPTIONS WOOLENS H
LINEN/EASY-C. 40°C
1200 RPM 10:17-12:16
ç
START
TIME SAVING
SELECT
DELAY STAR
GENTLE WASH(
BACK
STAIN
EXTRAS PRE WASH
EXTRAS
ì
SELECT
MEMORY(
ADD RINSE
BACK
GENTLE SPIN
LANGUAGE.