User manual

Adding detergent/

conditioner

Important: Only use detergents/conditioners that

are suitable for use in domestic washing machines.

Add detergent/conditioner in accordance with the

detergent/conditioner manufacturer’s instructions.

Observe instructions on the packaging.

The amount of detergent used depends on:

– the washing’s degree of soiling,

– the load size

– the hardness of the tap water.

Water softener should be used from water hardness

range 2 (=medium). The amount of detergent used

can then always be that as for hardness range 1

(=soft). Your local water company will provide you

with information about water hardness in your area.

1. Pull out the detergent drawer as far as it will go.

2. Add the detergent/conditioner.

3. Push the detergent drawer in fully.

Washing powder/tablets for the main wash cycle

If you are using water softener and require the right

compartment for detergent for the pre-wash cycle,

add the water softener on top of the detergent for the

main wash cycle in the left compartment.

Softener, wash-care products to preserve the

shape of garments, starch

Fill the compartment to no more than the MAX indi-

cator. Add water to thick liquid concentrates in ac-

cordance with the manufacturer’s instructions before

using them. Dissolve powder starches.

If you are using liquid detergent:

Add liquid detergent using the dosage containers

provided by the detergent manufacturer.

Stain removal agent/

stain removal tablets

Washing powder/tablets

for the main wash cycle

Softener/

Wash-care products to preserve

the shape of garments/Starch

Washing powder/tablets

for the pre-wash cycle

or water softener