User manual

When the display shows the indicators
and , the appliance does not heat the
water.
Spin
When you set a programme, the appliance
automatically sets the maximum spin
speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
The display shows only the
spin speeds available for the
set programme.
• Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained out
to prevent the fabrics from creasing.
The washing programme ends with
water in the drum.
The display shows the indicator .
The door stays locked and the drum
turns regularly to reduce creasing. You
must drain the water to unlock the door.
If you touch the Start/Pause button, the
appliance performs the spinning phase
and drains the water.
The appliance empties the
water out automatically after
18 hours approximately.
• Activate the Extra Silent option.
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator . The
door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
If you touch the Start/Pause button, the
appliance performs the only draining
phase.
The appliance empties the
water out automatically after
18 hours approximately.
• Drain Only option (Skipping the wash,
rinse and spin phases) .
The appliance performs the only
draining phase of the selected washing
programme.
The display shows the indicator
(cold), and the indicator (no spin)
and the indicator .
• Spin Only option (Skipping the wash
and rinse phases) .
The appliance performs only the
spinning phase of the selected washing
programme.
The display shows the indicator
(cold), the phase indicator and the
spin speed.
If it is necessary to reduce
the spin speed, select a
programme with a lower
spin speed as default.
Stain/Prewash
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
• Stain
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
. The stain remover is
pre-mixed and heated with detergent in
order to improve its effectiveness.
This option is not available
with a temperature lower
than 40 °C.
• Prewash
Use this option to add a prewash phase
at 30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
9