User manual

Touch this button repeatedly until the
desired temperature value appears on the
display.
When the display shows the indicators
and , the appliance does not heat the
water.
Spin
When you set a programme, the appliance
automatically sets the maximum spin
speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
The display shows only the
spin speeds available for the
set programme.
• Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained out
to prevent the fabrics from creasing.
The washing programme ends with
water in the drum.
The display shows the indicator .
The door stays locked and the drum
turns regularly to reduce creasing. You
must drain the water to unlock the door.
If you touch the Start/Pause button, the
appliance performs the spinning phase
and drains the water.
The appliance empties the
water out automatically after
18 hours approximately.
• Activate the Extra Silent option.
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator . The
door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
If you touch the Start/Pause button, the
appliance performs the only draining
phase.
The appliance empties the
water out automatically after
18 hours approximately.
• Activate the drain-only option
(Skipping the wash, rinse and spin
phases): Drain Only.
The appliance performs the only
draining phase of the selected washing
programme.
The display shows the indicator
(cold), and the indicator (no spin)
and the indicator .
• Activate the spin-only option
(Skipping the wash and rinse
phases): Spin Only.
Before setting this option,
select a suitable washing
programme for the
garments. The appliance will
performs the most fitting
spin cycle for your garments
care (e.g. For synthetics
items, first select the
Synthetics washing
programme and then the
Spin Only option).
The appliance performs only the
spinning phase of the selected washing
programme.
The display shows the indicator
(cold), the phase indicator and the
spin speed.
Stain/Prewash
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
• Stain
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
9