User manual

24
Removing the transit pack-
aging
Important: Before using the appliance for the first
time, all parts of the transit packaging must be re-
moved. Keep the transit packaging in a safe place, in
case it is needed at a later date when the appliance
is to be moved (e.g. moving house).
1. Open the two hose retainers located at the rear of
the appliance and remove the hoses and electrical
cable.
2. Pull the two hose retainers off the appliance by giv-
ing them a strong tug.
3. Remove both plastic caps sideways.
3 Special spanner A and sealing caps B (2 units)
and C (1 unit) come with the appliance.
4. Use special spanner A to remove screw D and the
pressure spring.
5. Turn sealing cap C upside down as shown in the il-
lustration.
6. Use sealing cap C to cap the hole.