User manual

17
What to do if ...
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
b
b
y
y
y
y
o
o
u
u
r
r
s
s
e
e
l
l
f
f
If, during operation, the error code
E
E
... plus
number or letter) appears on the LCD:
Switch the machine of
f and on again. Reset
programme. Press the START PAUSE button
If the error is still displayed, please inform
your local Service Force Centre and quote
the error code.
PPrroobblleemm PPoossssiibbllee ccaauussee RReemmeeddyy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic instal-
lation).
Loading door is open. Close loading door.
Have you pressed the START
PAUSE button?
Press the START PAUSE button
again.
Dryer does not work.
Wrong programme selected.
Select a different programme the
next time you dry (see
“Programme chart” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots in base area cov-
ered up.
Uncover ventilation slots in base
area.`
Residue on inside surface of
drum or drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
Clean inside surface of drum
and drum ribs.
Make an adjustment using the
DRYNESS function (see chapter
”Daily use”)
Re-programme standard setting
for degree of drying (see
‘Programming options’ chapter).
Loading door does not close.
Fine strainer not in place and/or
mesh filter not locked in place.
Install fine strainer and/or snap
large mesh filter into place.
When a button is pressed,
EErrrr
appears on the LCD.
Washing protection. After the
start of the programme, the
option can no longer be set.
Turn the programme knob to
OFF. Set the programme again.