User manual

ENGLISH

This light comes on at the end of the programme to

remind you that the water reservoir must be emptied

out. If this light illuminates during a programme this

means that the water reservoir is full. The buzzer

sounds, the programme stops, the light of the

Start/Pause button flashes.

KONDENS0R light - (Clogged condenser)

It comes on every 80 cycles to remind you that the

condenser must be cleaned.

7 Delay Start button -

STARTZEIT-

VORWAHL

This button allows you to delay the starting of the

programme by 3, 6 or 9 hours.

Press the button until the light relevant to the

desired delay lights up. This option must be

selected after having selected the programme and

before 3 6 9 pressing START/PAUSE to start the

programme. The machine begins the countdown,

which is shown by the pilot lights. For example, if

you have chosen a 9- hour delay (pilot light 9h lit),

after 3 hours, 9h goes out and 6h lights up; after 3

more hours, 6h goes out and 3h lights up. When the

9 hours are over (pilot light 3h off), the drying cycle

begins. During the delayed start period, it is not

possible to change the programme or the selected

delay. If you wish to do so, you must first cancel

everything by rotating the programme selector dial

to position “AUS”. Select the new programme, the

options and the delayed start, then press

START/PAUSE . If you wish to change only the

options, this can be done on condition that the new

option(s) is(are) compatible with the programme. Set

the machine to PAUSE by depressing the relevant

button, select the new option(s) and depress

START/PAUSE button again. If you wish to add

some laundry while the machine is performing the

countdown, after having done so and having closed

the door, press START/PAUSE again, in order to

allow the machine to complete the remaining

countdown time.

125987691_2.qxp 2007-06-20 13:50 Page 9