User manual

• The indicator still flashes.
• The display shows the current
setting.
– = the acoustic signal is
deactivated.
– = the acoustic signal is
activated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1. Press .
• The indicators , , , and
are off.
• The indicator still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
–
= TimeBeam deactivated.
2. Press
repeatedly to change the
colour.
3. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3 minutes,
the running programme ends.
AirDry is automatically activated with all
programmes excluding Vorspülen /
Prélavage (if applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
.
• The indicators , , , and
are off.
• The indicator still flashes.
• The display shows the current
setting
– = AirDry is deactivated.
– = AirDry is activated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
MyFavourite
This option allows to set and save the
most frequently used programme.
It is possible to save only 1 programme. A
new setting cancels the previous one.
11