User manual

Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the rinse aid
dispenser when Multi-tab function is ac-
tive,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button; if ALL programme
button lights come on the appliance is in set-
ting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme but-
ton light comes on the last performed or
selected programme is still set. In this case,
to return to setting mode, the programme
has to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on. The programme has
been cancelled and the appliance is now in
setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the appliance is
performing:
– setting of the water softener,
– end of the washing programme,
– intervention of an alarm due to malfunction
of the appliance.
Factory setting: audible signals activated
It is possible to deactivate the audible
signals.
Deactivation/activation of the audible
signals
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons B and C until the lights of function
buttons A, B and C start flashing.
3.
Press function button C, the lights of
function buttons A and B go off while the
light of function button C goes on flash-
ing. The digital display shows the current
level.
Audible signals deactivated
Audible signals activated
4. To change the setting, press function
button C again; the digital display shows
the new setting.
5. 5. To memorize the operation, switch off
the appliance by pressing the On/Off but-
ton.
First use
Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: ''3 in 1'', ''4 in 1'', ''5
in 1'' etc... set the Multitab function.
(See ''Multitab function'').
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
5