User manual

x4
A
B
Attach the sound barriers at a
room temperature.
13. Pull up the appliance in vertical
position.
14. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain hose.
This is due to the testing with
the appliance of water in
factory.
15. Remove the three bolts by using the
key supplied with the appliance.
16. Pull out the plastic spacers.
17. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you keep
the packaging and the transit
bolts for any movement of the
appliance.
Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do not
stop the air circulation below
the appliance.
Make sure that the appliance
does not touch the wall or other
units.
2. Loosen or tighten the feet to adjust the
level.
WARNING! Do not put
cardboard, wood or equivalent
materials below the appliance
feet to adjust the level.
7