User manual

With the flap in the position
DOWN:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
detergent than the limit
showed in the flap.
• Do not set the prewash
phase.
• Do not set the delay start
function.
5. Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
Setting a programme
1.
Turn the programme knob and set the
programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause -
Départ/Pause flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme phases
and the programme duration.
2. If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you
activate an option, the indicator of the
set option comes on.
If you set something incorrect,
the display shows the message
Err.
Starting a programme without
the delay start
Press button Start/Pause - Départ/Pause to
start the programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase is
operation starts to flash.
The programme starts, the door is locked.
The display show the indicator .
The drain pump can operate for
a short time when the appliance
fills water.
Behaviour of the appliance
After approximately 15 minutes
from the start of the
programme:
• The appliance adjusts
automatically the cycle time
to the laundry you have put in
the drum to have perfect
washing results in the
minimum necessary time.
• The display shows the new
time value.
Starting a programme with the
delay start
1.
Press button Zeitvorwahl - Départ
Différé again and again until the display
shows the number of minutes or hours
of delay.
The related indicator comes on.
2. Press button Start/Pause - Départ/
Pause.
The appliance starts the countdown of the
delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button Start/
Pause - Départ/Pause to start
the appliance, you can cancel or
change the set of the delay
start.
Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pause - Départ/
Pause to set the appliance to pause.
The related indicator flashes.
2. Press button Zeitvorwahl - Départ
Différé repeatedly until the display
shows
.
3. Press button Start/Pause - Départ/
Pause again to start the programme
immediately.
15