User manual

Cleaning the heat exchanger
If the indicator Heat exchanger
(Kondensator) flashes, do the inspection
of the heat exchanger and its compartment.
If there is a dirt, clean it.
To do the inspection:
1. Open the door. Pull the filter.
2.
Move the release button on the bottom
of the door to open the heat exchanger
door.
3. Turn the blockage to unlock the heat
exchanger cover.
4. Lower the heat exchanger cover.
5.
If necessary, remove the fluff from the
heat exchanger and its compartment.
You can use wet cloth and/or a vacuum
cleaner with the brush.
6. Close the heat exchanger cover.
7. Lock the blockage until it snaps.
8. Put the filter back.
Cleaning the drum
WARNING! Disconnect the
appliance before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum ribs. Dry the cleaned surfaces with a
soft cloth.
CAUTION! Do not use abrasive
materials or steel wool to clean
the drum.
19